Treat Your Meat Right With A Bottle Of Dad Spice!
Your Cart
Total: $0.00

Secure checkout powered by Stripe

Tips

How to Clean Grill Grates (The Easy Way)

The short answer

To clean grill grates, heat them hot for 10 to 15 minutes to burn off residue, then scrub with a grill brush or crumpled foil. For a deep clean, soak them in warm soapy water.

Clean grill grates make your food taste better, cook more evenly, and stop old gunk from causing flare-ups. The good news is it only takes a few minutes if you do it the right way. Here is how to clean grill grates, both a quick clean after each cook and a deeper clean now and then.

Why clean your grill grates?

Burnt-on food and grease do more than look bad. They stick to your fresh food, cause flare-ups, and can even give things an off taste. A clean grate also helps you get those nice sear marks. It is worth the two minutes.

The quick clean (after every cook)

  1. Heat the grill. Close the lid and let it run hot for 10 to 15 minutes. This turns stuck-on food to ash.
  2. Scrub the grates. Use a grill brush or a wad of crumpled foil held in tongs to scrape off the loose bits.
  3. Wipe and oil. Wipe the grates with a paper towel, then rub on a thin coat of high-smoke-point oil so food will not stick next time.

Doing this while the grill is still warm after cooking is the easiest time, since the residue has not fully hardened yet.

The deep clean (every month or so)

  1. Let the grates cool, then take them out.
  2. Soak them in warm water with a little dish soap for 30 minutes to an hour.
  3. Scrub with a sponge or a soft brush. The soak loosens the baked-on grease.
  4. Rinse well, dry completely so they do not rust, and rub on a light coat of oil.

While the grates soak, scrape out the inside of the grill and empty the grease tray. On a charcoal grill, clean out the old ash so air can flow.

Gas grill vs charcoal grill

The grate cleaning is the same for both. The difference is underneath. Gas grills have a grease tray to empty and burner tubes to keep clear. Charcoal grills need the old ash removed so the vents work. Keep both clear and your grill will light easier and burn hotter.

A safety note on wire brushes

Old wire grill brushes can shed tiny bristles that end up in your food. To stay safe, check your brush often and replace it when it looks worn, or skip it and use a wad of crumpled aluminum foil or a bristle-free coil brush instead. A quick look at the grate before you cook never hurts.

Keep it from getting bad again

  • Clean while warm. A quick scrape after each cook beats a big scrub later.
  • Oil the grates. A light coat of oil keeps food from sticking and makes cleanup easier.
  • Cover your grill. A cover keeps out rain and dirt between cooks.

A clean grill is a happy grill. Keep those grates clean, then go put them to work and season something. New to high-heat grilling oils? See our guide on the best oil for grilling.

Frequently asked questions

How do you clean grill grates?

Heat the grill hot for 10 to 15 minutes to burn off residue, then scrub with a grill brush or crumpled foil. Wipe clean and rub on a little oil.

How do you deep clean grill grates?

Remove the cooled grates and soak them in warm soapy water for 30 to 60 minutes, then scrub, rinse, dry fully, and oil them so they do not rust.

Should you clean your grill after every use?

Yes, a quick clean after each cook is best. Scrape the warm grates while the residue is still soft, then do a deeper soak and clean about once a month.

Are wire grill brushes safe?

They can shed bristles that get into food. Check your brush often and replace worn ones, or use crumpled aluminum foil or a bristle-free coil brush instead.

FO
Written by Freddy Owen

Freddy Owen runs Dad Spice and has spent years at the grill. He writes about grilling technique, seasoning, and getting bold flavor on any grill or smoker. Meet the team →

Share:

Make it taste better.

Grab a bottle of The Classic and season like you mean it.

Shop The Classic